Product features:

① It can quickly gather various slag and impurities, and the slag film will not be broken. It can be picked out as a whole at one time and the slag can be removed thoroughly.

② Non-stick bag, no damage to the bag wall and furnace wall, reducing the loss of rare metals.

③ Eliminate slag inclusions in castings, improve casting quality, and reduce casting scrap rates.

④ The slag removal agent can quickly form a film on the surface of the casting liquid and effectively maintain heat.

⑤ The reaction is balanced when in contact with metal, does not splash, is non-toxic and tasteless, does not produce smoke, and does not affect human health.

How to use:

The slag remover is simple and convenient to use. Usually during the smelting process, the molten steel is sprinkled on the surface of the molten steel in the furnace. When slagging forms on the surface, it can be picked out with a drill. If the slag content is too much, the operation can be repeated once. The dosage is determined according to the slag content of the casting liquid during smelting and the quality requirements of the casting. One ton of casting liquid is 1-1.5kg. If it is used for heat preservation after slag removal of the casting liquid, it can be sprinkled on the surface of the molten metal. It will automatically spread and cover the surface of the molten metal, and will lower as the casting liquid is poured. It will not stick to the bag or hang the bag. After the casting liquid is poured, pick out the covering layer with a steel drill or leave it on the surface of the remaining molten metal to keep it warm.